USB Wifi Router

The WiFi Router is used with the Ethernet to Wireless adaptor to provide an outdoor wireless access point for connection to the RC10 cubicle. It has a weather proof housing and can be used with an external antenna if required.

Accessory type: Communications

Overview

The WiFi Router can be powered from the RC10 external load with a supplied cable.

A 12VDC power source can be used if the router is used elsewhere.

The router is configured through the Ethernet port with a web interface.

The following features are supported:

  • ¬†Wireless 802.11g, 802.11b, 802.3 and 802.3u supported
  • AP Client Router, AP Router and AP operation mode
  • High output transmit power and receive sensitivity optimized
  • Passive power over Ethernet
  • Antenna Alignment
  • Provides throughput monitor indicating the current wireless throughput
  • Output transmit power adjustable
  • Supports PPPoE, Dynamic IP, Static IP Internet Access
  • Built-in NAT and DHCP server supporting static IP address distributing
  • Supports UPnP, Dynamic DNS, Static Routing, VPN Pass-through
  • Built-in firewall supporting IP address filtering, Domain Name filtering, and MAC address filtering
  • Provides WLAN ACL (Access Control List)
  • Supports Web management

To configure the NOJA Power Recloser App for Android Smart Phone/Tablet, iPhone and iPad the USB WiFi router must be fitted to the RC10 to allow remote engineering access. The NOJA PowerRecloser App is available on Android and Apple App Store free of charge.